Tree with dead “hangers” from recent windstorms in the Panhandle. These dead broken limbs should be assessed and removed accordingly. Photo Credit: Ian Stone
Recently our area has experienced multiple severe wind events. You may have noticed some light to moderate damage to some of the trees in your yard. You may have even experienced severe damage or a complete failure of a tree on your or a neighbor’s property. While a complete failure or severe damage pose obvious hazards and need removal, it is the more minor to moderate damage that often raises questions on how to address the issue. Hanging broken branches are often called “Hangers” in forestry or tree care circles. These are often smaller to mid-sized branches which have partially broken off but are still lodged in the tree. After several weeks to a month the foliage starts to die and turn brown, and these “hangers” become obvious in trees that received damage. How do you assess these and when should you get a professional involved? Do they pose a potential health issue if not removed?
These broken limbs are becoming quite noticeable as they die and turn brown. It is important to make good decisions on how to handle these hanging dead branches and how to maintain your tree. Often these hangers are more unsightly than anything else, especially if they are small. Larger ones may pose a risk of damage or injury if they are located over a structure or may fall in an area frequented by people. Most of these hangers will break and dislodge over time, especially in wind events. You should consider the risk posed by the hanging limb, the difficulty and cost of addressing it, and the risk posed by the limb falling. For trees that got noticeable damage with several larger limbs broken, having some repair and rejuvenation pruning done is often good for tree health. You may be able to address some issues yourself if you are handy with a pole pruner and the broken limb is in reach. Anyone attempting even light tree work should be aware of risks posed by falling limbs and use of pole saws. Remember to never attempt to climb trees yourself or perform tree trimming from a ladder or height, as this is fundamentally unsafe. Even limbs which may be safely reached from the ground with a pole pruner can pose risks of injury. If you are attempting to remove some of these hangers with a pole pruner, be very cautious and use good safety techniques. You need to make sure the branch has a landing zone, and you are well clear of it when using a pole saw or pruner. Be aware of vines and other entanglements, and do not work around or within the right of way of electrical or other lines. Larger limbs and those not reachable from the ground should be considered outside the scope of homeowners and left to professionals.
Here is a quick reference guide for how to size up any broken or damaged limbs in your tree and address the situation
Small branches and branch tips with a diameter of the broken branch is 1 inch or less and the branch is hanging or lodged. These size hangers pose little risk and are mostly unsightly. They should fall out of the tree on their own over time. These may be trimmed out slightly behind the break of those within reach of a pole pruner.
Small to Medium branches-1-3 inches in diameter. The branch has partially broken or has completely broken and is lodged in another branch. Branches this size can do some light to moderate damage if they fall on a roof, fence, or other structure. If the branch overhangs areas where people or pets frequent it could cause injuries if it fails. If the branch does not pose a hazard or danger it should dislodge on its own over time. Consider removing these if they pose a risk. They can be removed from the ground with a pole pruner or pole saw but be very cautious as branches this size can easily injure someone that is in the fall zone. Consult a professional if a lift or climbing is required.
Large Canopy Branches 3 inches and larger. These are significant branches and can hold a significant amount of weight. If they are partially broken, hung, or lodged in the tree they may come out at any time and do significant damage or cause injury. These branches are beyond the tools and scope of homeowners, and the damage may require some recovery pruning to keep the tree healthy. Consult with a professional and consider having the damage removed and tree properly trimmed.
Main Branch and Trunk Failures- This is significant damage to the tree which can make it unsound or susceptible to disease in the future. If large main branches have failed, the top has completely failed, or part of the trunk has cracked or split from the damage; major damage has occurred and the tree may not recover. If your tree has suffered this level of damage consult a professional with a tree service and have a certified arborist examine the tree.
It can be hard to tell from the ground what level of damage a tree sustained until the brown foliage appears past the break. Once you can identify what type of damage occurred you can better determine what action is needed. For small branches it may be best just to wait for them to come out naturally or prune them out if this can be done safely with a pole pruner. For larger branches or more severe damage a professional is the best bet. For those hangers that pose a risk to structures or people in an area removal is best, as these could fall at any time and cause damage or injury. Remember never to attempt tree work yourself especially if it involves climbing or working from heights. You can find a certified arborist at www.treesaregood.org to address large limbs and significant damage. A good arborist can help you rehabilitate a tree that has had only moderate damage from a storm. If you are unsure of where to start with a tree that has wind damage, consult your local extension office for some advice.
Sweet Viburnum (Viburnum odoratissimum) is thought of as being an ironclad landscape shrub, generally a rapid, healthy grower free of insects and disease. However, this spring, many Sweet Viburnum specimens across the Panhandle have experienced varying degrees of dieback, from individual shoots to entire sections of shrubs, caused by the fungal pathogen Botryosphaeria – commonly known as Bot Rot.
Typical symptom of Bot Rot on Sweet Viburnum. Photo courtesy of Daniel Leonard.
Bot Rot almost always appears after some kind of major stress event that impacts susceptible plants – drought, pruning wounds, nutritional deficiencies, or another environmental stress. We haven’t been afflicted lately with any serious drought conditions and the disease occurrences are too widespread to have been a result of isolated pruning or poor plant nutrition. However, the Panhandle did experience a major environmental event around Christmas 2022 that was plenty stressful for landscape plants, a weeklong Arctic blast of extreme cold. This abrupt hard freeze event in an otherwise mild winter is my best guess for what brought about the increased incidence of Botryosphaeria we have experienced this spring.
The Botryosphaeria fungus enters plants via wounds – in this case one probably caused by cold – and begins destroying the plant’s vascular system in the area. As the pathogen progresses, it eventually causes sunken cankers to appear, girdles the affected branch, and cuts off “circulation” in that stem. The first symptom of Bot Rot that gardeners notice is shoots rapidly wilting and exhibiting a blighted appearance, with brown, dead leaves holding onto affected limbs. Unfortunately, dieback isn’t always limited to individual shoots and can spread back into plants to eventually encompass whole branches. Entire plants dying from Bot Rot infection is not uncommon.
While there aren’t any fungicides that are effective in controlling or preventing Bot Rot, gardeners can arrest its spread by pruning out infected branches. To completely rid the plant of the fungus, make sure to prune 4” or so below the last infected plant tissue (symptomatic tissue will appear dark and discolored; healthy tissue will appear light and greenish). After pruning each affected plant, it is important to sanitize pruning equipment with either a 10% bleach solution or 70%+ isopropyl alcohol to prevent spreading pathogens to other healthy plants! Plants that have been irreparably disfigured by Bot Rot or outright killed may be pulled and discarded offsite.
While this year’s Bot Rot infestation has been extremely frustrating and similar future freeze events can’t be ruled out, gardeners should not give up on Sweet Viburnum, an excellent specimen or screening shrub. Keeping plants healthy with proper pruning, good fertility, and adequate irrigation is the best defense to ward off future infection when we experience harsh environmental conditions! For more information on Bot Rot, Sweet Viburnum, or any other horticultural topic, contact your local UF/IFAS County Extension Office! Happy Gardening.
Palms in North Florida suffered serious damage as a result of freezing weather in December 2022. As spring approaches, we will be looking to see if the palms will recover. Learn what to do now and what to expect from your palms with UF IFAS Extension Escambia County.
Pruning is a much needed yet often misunderstood practice. This is perfectly understandable as most people look at a tree and wonder which branches need to be cut, why they need to be cut, and what time of year is appropriate to do so. Confusion is understandable, but a better grasp on a few key concepts will clear everything up.
Structure
Red Maple structure IFAS Photo: Hassing, G.
Before you begin to look into anything else, it is important to understand the structure of a tree. For the purposes of pruning, we’ll focus on roots, and stems. The roots of a tree anchor it to the ground providing water and nutrition to the main stems of the tree. Roots and stems in any plant are a delicate balance. Cutting stem tissue will affect roots so don’t remove too much in a single session. A good rule of thumb is to not take more than 1/3 of the stem tissue present. The next concept is the natural shape of the tree you want to trim. Most have one dominant leader with supporting branches forming the canopy. In these cases, remove competing leaders to keep the canopy full and well-shaped. Other trees such as crape myrtle (Lagerstroemia indica) are multi-stemmed with 2-3 codominant leaders. Prune away any challengers to your main leaders while keeping the “vase” shape for which these trees are known. With this in mind, it’s time to decide which stems to remove.
What to Cut
Safety and tree health are the focus as a homeowner decides which stems need pruning. When a branch is to be removed, make your cut It is important to keep the branch collar in mind when making your cuts. This collar is denoted as a ring of tissue at the connection of branch and trunk. Cut as closely as possible without disrupting this tissue. Any dead, diseased, and damaged branches are the first needing cut. They take resources from the healthy branches and are unsightly. Next, look for any crossing limbs. These scrape against one another as the wind blows and risk destroying bark tissue making the tree susceptible to disease. Focus next on structural issues or tree shape. Remove challenges to the leaders as outlined in the previous paragraph. Safety concerns will be your next focus. Look for bark inclusions which are weak connections indicated with a “V” shaped fork between limbs which may fail in high wind. If found, consult a certified arborist as pruning may not be your only option. Finally, eliminate lower limbs impeding walkways and any drooping from their own weight. This is also when species specific pruning is prudent to promote flowering or fruiting.
Branch collar example IFAS photo: Gilman E., Bisson A.
When to Cut
Now that we know what to prune, when is it prudent to do so? This cycle will vary based on quality of stock from the nursery, age of the tree, growth rate, and how prone they are to decay. In Florida, this is on average every three years. Keep in mind the “May rule” when considering what time of year to prune. Any plant blooming prior to May should be pruned once flowering has ceased, but no later than July. Any plant blooming after May should be pruned around February or March at the latest.
Examples of bark inclusions IFAS Photo: Gilman, E., Bisson A.
Pruning is an important practice for keeping your trees healthy and ensuring safety. With some knowledge you’ll find it is not the mystery you may have thought it to be. For more information on pruning, please see these IFAS documents, or contact local extension agent for additional information on this and any topic regarding your gardens and more.
Variegated shell ginger is a good choice for adding color to shaded areas of the landscape. Photo by David W. Marshall.
What to Do in the Garden in March and April
Written by David W. Marshall, UF/IFAS Leon County Extension Agent Emeritus
Except for a couple of freezes, it has been a relatively mild winter. But those freezes were cold enough and long enough to kill many tropical plants almost to the ground. Will we have more freezes? It’s possible, though after we reach mid-March, the probability drops significantly.
Some plants, such as this firebush, had stems killed back to the ground by the cold and will re-sprout from the root system. Photo by David W. Marshall.
So, when can you start cleaning up all the cold damaged plants? You probably have the urge to do it as soon as possible, as the brown foliage and stems are a little depressing. Many of us have lots of cold-damaged plants and we want to get the cleanup finished. First, though, examine the plants to determine the extent of the cold damage. Scrape the bark with your fingernail or use a pocketknife to see if the tissue beneath is still green or if it has turned brown due to cold damage. In many cases, you will find that the stems have been killed back to within a foot of the ground. On other plants, you may find that some of the stems still appear green higher up and you may not have to cut them back quite as far. If that’s the case, you may wish to wait until mid-March to cut these plants back. In case we have another hard freeze, the damaged growth may offer a little insulation to the undamaged parts of the plant. With most plants there’s no real need to cut them back until the new growth starts popping out, probably in late March.
The stems of butterfly gingers can be completely removed now. Many of these will just pop off when pulled lightly. Others may have to be cut, but it won’t hurt them. Variegated shell gingers, in many cases, will still have some undamaged growth mixed in below the brown leaves. You won’t kill a well-established shell ginger by cutting it back now, but because of the insulating effect of the brown leaves, it’s probably best to wait until mid-March to cut them back.
Azaleas and camellias, typical of a North Florida spring, were blooming by late February this year. If you don’t have some of these in your yard, now is a good time to plant. Photo by David W. Marshall.
You may have other shrubs that you wish to prune now also. Wait to prune spring bloomers like loropetalum and azalea until after they finish flowering. Some overgrown shrubs may need to be cut back hard to rejuvenate them, and if you do it now, they will have longer to recover. Before crepe myrtles start putting out new leaves, work on the shape of the tree. Remove poorly placed rubbing and crossover branches by cutting all the way back to the trunk or branch from where they grow. Don’t, however, top the tree unless you are purposely trying to pollard the tree and completely understand how to do it correctly. Otherwise, you will likely end up with a mess.
In mid-March, be prepared to plant warm-season vegetables such as tomatoes, snap beans, pole beans, lima beans, sweet corn, southern peas, squash, and watermelons. So, make sure you have the garden tilled before then. If you wait until April or May to plant, your harvest will be later and the insect and diseases will get much of the crop. Warm-season herbs can be added after mid-March.
Don’t be overly anxious to fertilize your lawn, especially if you have centipede grass. Wait until at least mid-March. Make sure the lawn has been fully green for three weeks before fertilizing. If this pushes you into April, fine. It’s better to fertilize too late than too early. Centipede lawns that are fertilized too early often have spring yellowing problems. St. Augustine grass is more forgiving, but don’t fertilize it either until at least mid-March. Use 6.7 pounds of 15-0-15 fertilizer per 1,000 square feet of lawn area. If the fertilizer doesn’t contain at least a third of its nitrogen in a slow-release form, though, cut the application rate in half.
Most of the weeds in the lawn now are winter annuals that will die out as the weather gets hotter. Just keep your lawn mowed regularly until they do. If you usually still have problems with weeds in the summer, though, you could use a pre-emergent herbicide to reduce the emergence of the summer weeds.
To keep fire ants out of your yard, broadcast a bait formulated product over the entire yard, according to the label directions. Plan to treat again in fall. You can quickly apply the bait using a small hand spreader available from your garden center.
Now, before it gets hotter, add some colorful camellias to your landscape. Photo by David W. Marshall.
Now, before it gets hotter, add some colorful azaleas, camellias, roses, and loropetalum shrubs to your landscape. Also consider fragrant plants such as tea olives, banana shrubs, and sweet viburnum. The sooner you plant these in the spring, the quicker they will get established and grow.
Lavender trumpet vine (Clytostoma callistegioides), crossvine (Bignonia capreolata), coral honeysuckle, and Confederate jasmine are vines that flower during this period of the year. Now is a good time to plant them also.
Don’t forget groundcovers such as liriope, Lomandra, Mondo grass, Dianella (New Zealand flax), African iris, or any of a variety of ferns. Groundcovers planted now will have a full growing season to get established. Groundcovers are often a good choice for plantings in front of the house where you don’t want tall shrubs.
Add some long-blooming seasonal color to your yard this spring. Once we reach mid-March the nurseries will be loaded with many possibilities. Petunias will give you a lot of color in sunny areas for about three months. After the summer rains start in June they normally decline. Pentas will hold up on through the summer and into fall. They prefer full sun but will take a little filtered sunlight too. Sunpatiens® will work in sun or shade and should hold up through the summer. Melampodium will give continuous yellow blooms in sunny areas through summer and into fall. Torenias, especially the trailing or vining types, are excellent for providing low-growing color in areas that receive morning sun but not so much harsh afternoon sun. But there are many other options, too, so visit a full-service nursery with knowledgeable employees that can guide you.
Pentas can be planted in mid to late March and will give color until late fall. Plant in full sun to light shade. Photo by David W. Marshall.
Also, later in the month, start planting perennials such as firebush, angel’s trumpet, cigar flower, and Turk’s cap so you will have color later in the season that will last into fall. These perennials will return each year, even if the tops get frozen back.
There’s no need to fertilize mature trees and shrubs that are growing well. But young plants which you’re trying to encourage to grow will benefit from an application of fertilizer now. The same 15-0-15 that you used for the lawn can be used on trees and shrubs, provided it’s not a weed-and-feed product with an herbicide. The exception would be with palms, especially if you’ve noticed that your palms haven’t been looking that healthy. Use an 8-2-12 or similar palm fertilizer that has four percent magnesium and micronutrients also. If you have a lot of palms in the lawn, just use this palm fertilizer on your whole lawn.
If you didn’t get around to fertilizing fruit plants in February, do it now. After mid-March is also a good time to plant new citrus trees such as satsuma, orange, or grapefruit. You have a full growing season ahead!
Anything that you plant now will need regular watering. That’s what they were receiving in the nursery. Remember that for several months, at least, all the roots will still be in the root ball that was in the pot, even after you put the plant in the ground. So, soak this root ball at least every other day. Don’t rely on a sprinkler system that only comes on once or twice a week. That’s not enough water for the limited root systems of new plants.
Written by David W. Marshall, an Extension Agent Emeritus with UF/IFAS Extension Leon County.
