Now that we are moving into warmer soil temperatures, weak areas in lawns will have a better chance of making some recovery. However, this is highly dependent on whether or not correct lawn maintenance practices are followed. These practices include fertilizing, mowing and watering correctly.
Warmer soil and correct care help improve weak lawns
Many North Florida lawns came out of winter weak and thinning this spring. In areas of the lawn where there is at least sixty percent cover of the desirable type of lawn grass, recovery is possible. But where there is less than sixty percent desirable cover, reestablishment should be considered.
Applying the correct type and amount of fertilizer will promote lawn recovery. To maintain a healthy Florida lawn, it’s critical to use a fertilizer with adequate potassium. In most cases, use a lawn fertilizer with equal amounts of nitrogen (first number) and potassium (third number) such as 8-0-8, 10-0-10, 15-2-15 or similar analysis. Phosphorus (second number) should be low or zero unless you have the results of a reliable soil test indicating that more phosphorus is needed. Err on the side of being light handed when applying fertilizer to the lawn. In North Florida, most lawns will do just fine with an application in spring no earlier than mid-April and a second application in summer no later than mid-September.
Follow these mowing practices for a healthy lawn.
Never remove more than 1/3 of the leaf blade height at any one time.
Here’s the recommended mowing height in inches for each lawn grass: bahia – 3 to 4; centipede – 1.5 to 2; standard St. Augustine cultivars – 3 to 4; dwarf St. Augustine cultivars (Captiva and Seville) – 2 to 3; zoysia cultivars suitable for home lawns- 2 to 2.5; bermuda – .5 to 1.5.
Keep mower blades sharp.
Follow these irrigation practices for a deeper rooted and drought tolerant lawn.
Turn your automatic sprinkler system off and learn to operate it manually on an as-needed basis. Your lawn needs water when leaf blades start to fold in half lengthwise or when footprints remain visible in the lawn long after being made. Irrigate when at least 30% of the lawn shows these signs of water need.
Apply ½ – ¾ inch of water when you do irrigate. Place empty, straight-sided cans in the area being irrigated to see how long it takes to reach this amount.
Irrigate during early morning for more efficient water use and to minimize lawn diseases.
Here is a link to a UF/IFAS Extension publication on Best Management Practices for a Florida lawn. http://edis.ifas.ufl.edu/ep236
Written by: Khadejah Scott, Horticulture, Agriculture, & Natural Resources Extension Agent, UF/IFAS Extension – Wakulla County
A well-manicured lawn not only enhances the beauty of your property but also provides a welcoming outdoor space. In North Florida, where warm weather and abundant rainfall create ideal conditions for lush green lawns, proper mowing practices play a crucial role in maintaining a healthy and vibrant landscape. With the right techniques and considerations tailored to the unique characteristics of this region, you can achieve a pristine lawn that becomes the envy of the neighborhood. In this article, we will explore essential tips and insights for mowing your North Florida lawn, helping you unleash the full potential of your outdoor haven while ensuring its long-term health and sustainability.
Mowing a lawn. Photo Credit: University of Florida/IFAS
Mowing Heights
The turfgrass species’ growth pattern and leaf width influence the ideal mowing height. Grass species that grow horizontally and have narrow leaf blades are often cut lower than grasses that grow upright and have wider leaf blades. Because of its numerous tiny leaf blades, Bermudagrass is an example of a plant that is mowed at low heights. St. Augustinegrass, on the other hand, has wider leaf blades and is cut at a higher height. Rooting depth is also influenced by mowing, with deeper roots developing in response to higher mowing heights. Greater resistance to drought, insects, disease, nematodes, temperature stress, poor soil conditions, nutritional deficiencies, and traffic are benefits of the deeper root system. The main cause of turf damage is frequent mowing below the suggested heights for each species, which should be avoided.
Mowing Frequency
The frequency of lawn mowing is determined by the rate at which the grass grows, which is influenced by various factors such as the type of grass, time of year, weather conditions, and the level of maintenance. In North Florida, the need for mowing during winter months may vary depending on the climate and the type of grass present. Grasses like bahiagrass, which require less maintenance, may primarily be mowed to remove seedheads rather than cutting the leaf blades. To maintain a healthy lawn, it is recommended to mow frequently enough to remove no more than one-third of the blade height at a time. Preserving an ample amount of leaf surface is crucial to allow for photosynthesis, especially when the grass is exposed to environmental or site-related stresses.
A lawn up close. Photo Credit: University of Florida/IFAS
Using Grass Clippings
Leaving grass clippings on the lawn is generally beneficial as it aids in recycling nutrients and organic matter, while reducing waste in landfills. When lawns are regularly mowed, clippings pose minimal issues. Microbes in the soil readily decompose the clippings, returning valuable organic matter and nutrients to the soil without contributing to thatch buildup under normal conditions. However, infrequent mowing can lead to excess clippings, resulting in clumping and potential thatch formation. Excessive thatch can create various problems, including reduced water infiltration, increased risk of pests and diseases, and diminished turf quality. To mitigate environmental concerns, it is crucial to sweep up any grass clippings from hard surfaces like sidewalks or driveways. These clippings contain nutrients that, if washed into storm drains or water bodies, can contribute to water pollution. By sweeping them back onto the lawn, the grass can benefit from the nutrients while minimizing environmental impact.
Proper mowing practices are essential for maintaining a healthy and vibrant lawn in North Florida’s unique climate. Understanding the growth patterns of different grass species, adjusting mowing frequency accordingly, and leaving clippings on the lawn to recycle nutrients are key aspects of lawn maintenance. By following these guidelines, homeowners can achieve a well-manicured lawn that enhances the beauty of their property while promoting environmental sustainability. Additionally, regular mowing helps prevent thatch buildup, ensures optimal photosynthesis, and reduces the risk of pest and disease infestations. By implementing these best practices, residents of North Florida can enjoy a lush, resilient, and visually appealing lawn that serves as a welcoming outdoor space for years to come. Remember, mowing is not just a chore but an art that contributes to the overall health and aesthetics of your landscape. UF/IFAS provides a wealth of information online regarding maintaining a well-manicured lawn. For any questions or concerns, be sure to consult with your local UF/IFAS Extension Office.
It’s early spring which means time to pull the mower out of the garage and turn that engine over for the first time in months. As with most years, this task may be easier said than done. You fill the tank, check the oil, then pull that string hoping to hear that engine hum to life. Instead with a disappointing spurt, it putters back to sleep. Discouraged, you bounce between the carburetor and spark plug just knowing there is a simple solution. Finally, everything gets cleaned then reassembled, you pull that cord but this time the mower springs to life. As you stand there feeling the cold air on your skin you survey the lawn and think about how little you’re up for this effort today. Why not take another month off of this lawncare duty by partaking in your Panhandle horticulture agents’ “No-Mow March” initiative. Doing so can not only save you the early season frustration outlined above but may help you hold on to a little bit of your hard-earned dollars.
The Underlying Cost
It’s time we talk about the price of cutting your grass. A universal expense should you push your mower or ride on top is gasoline. Have you ever taken a minute to determine how much it costs to mow your lawn across the course of a season? For our purposes here, we’ll consider a single season to be March through September. Assuming you mow weekly as you should, that accounts for 28 sessions. On average, assuming your grass is dry, a walk behind mower will burn through about a liter or roughly a quarter gallon per acre of mowed lawn. With gas prices in Florida running at $3.45 per gallon according to AAA, that will cost $24.15 to cut your lawn across a single mowing season. Riding mowers exacerbate this even more burning through half to three quarters of a gallon per acre mowed. To be fair, they have a bigger job being as they must propel their own weight and that of the operator. In this instance, the cost of gas can run you anywhere between $48.30 and $72.45 in a season. All of this assumes that your mower is running efficiently. Why not cut yourself and your wallet a break and avoid mowing at all early in the season. Sit back and relax for a while longer this year and skip mowing in March and save yourself a little time and money. Your neighbors may complain. Tell them you’re helping both your back and the bees.
IFAS Photo
Beneficiaries
Early spring begins with emerging pollinator species. They spent the winter months holed up in their nests bunkered against the cold weather. Around March they stick their heads out and begin looking for nearby nectar sources. A good place to start is with the flowers which have popped up in your yard over winter. We see them as weeds, but to these titans of pollination they might just be the key to life.
Monarch (Danaus plexippus), Butterflies in the McGuire Butterfly Garden, flowers, plants. UF/IFAS Photo: Sally Lanigan.
Conclusion
Information on “No-Mow March” may be found by heading over to our information page located here. Information on pollinators may be found on these Ask IFAS documents or by contacting your local extension agent for this and any topic regarding your gardens and more.
A watering tin and gardening gloves at a home garden.
Spending time gardening in the summer months can be difficult, especially in the Florida Panhandle. The brutally high temperatures and sometimes intensive humidity can make gardening seem unbearable. However, for those brave outdoor enthusiasts, there are always things to do around the homestead when it comes to vegetable gardening, landscape shrubs and lawn care.
Warm season vegetable gardening at this point becomes an uphill battle for some crops, with this being peak time for both insect and disease problems to occur. However, if you planted early enough, much of your harvest is probably in the safe zone. Scouting is key to prevent any major pest damage. Be sure to scout several times a week during these hot, summer days.
Shifting gears, the warm season is a good time to take extra special care of plants such as, azaleas and camellias, while they are establishing flower buds for the next bloom. A lack of water, fertilizer and pest detection and prevention can all certainly play a role in the following season’s flower production. Summer annuals always provide quick and easy color. Remember to feed established annuals with a complete fertilizer and remove faded blooms along the way. Water annuals well during hot, dry periods and control major annual pests to insure good production.
Finally, lawn maintenance is a need for many homeowners during this time of year. Almost all highly successful herbicides are no longer recommended at this point, as many will burn the turfgrass at temperatures above 80 degrees Fahrenheit. Depending on the weed pest and type of turfgrass, most likely the best way to control weeds in your lawn is to wait until cooler fall temperature to treat. Keeping good cultural practices this time of year will help in maintaining a healthy lawn and reduce pest pressure. Be sure to water lawns thoroughly when needed by applying one to three quarters of an inch of water weekly, depending on rainfall. Be sure to keep in mind mower height/frequency, as this is critical in keeping your lawn healthy. As stated in the “Mowing Your Florida Lawn” UF/IFAS EDIS publication, mow often enough so that no more than 1/3 of the blade height is removed per mowing. For example, if your St. Augustinegrass lawn is mowed at a height of 4 inches, it should be mowed before it grows to a height above 6 inches. It is important to always leave as much leaf surface as possible so that photosynthesis can occur, particularly in a grass that is subject to environmental or site stresses.
Unfortunately, it is chinch bug time again. Chinch bugs are prone to feed on St. Augustine lawns during hot, dry weather and may cause serious damage if not controlled. Damage usually occurs as a patch with a brown, dead center and yellowish margin. It seems chinch bugs get the blame, and often unjustly, for everything. Consult with your local county extension office to be sure the damage is not due to other reasons.
For more information, please contact your local county extension office.
Supporting information for this article can be found in the UF/IFAS EDIS publications/websites below:
A new research project at the West Florida Research and Education Center in Jay, FL is looking into the quality of turfgrass cut with a robotic mower. The study is to determine whether the quality of St. Augustinegrass can be improved by continuous mowing with a robotic mower at 2.4″ height instead of the traditional mowing height of 3.5″, removing only a third of leaf blade material per mowing.
Dr. Shaddox talking to participants at the 2018 Gulfcoast Expo & Turfgrass Field Day. Photo Credit: Matt Lollar, University of Florida/IFAS Extension.
The mower being tested is the Miimo manufactured by Honda. This particular model mows and charges on its own and can mow up to 0.37 acres on one charge. It can mow in three programmable cutting patterns: directional; random; or mixed. The study is utilizing the random cutting pattern.
The mower’s three, two-sided blades are mounted on a circular head that can rotate both clockwise and counter-clockwise. The head automatically switches between clockwise and counter-clockwise rotation to reduce wear on the blades. The blades are basically just two-sided razor blades. A buried guide wire is installed on the perimeter of the lawn to serve as a boundary.
A close-up shot of the Miimo mower blades. Photo Credit: Matt Lollar, University of Florida/IFAS Extension.
So far, the plots cared for by the robotic mower look promising! The blades on the robot are much finer than those found on a common rotary mower. Because of this, they cut more cleanly and tend to tear the grass blades less often than the rotary mower. Other robotic mowers on the market include the Worx Landroid, Husqvarna Automower, and Bosch Indego. Please stay tuned for future robotic mower evaluations on other products, energy consumption, and nutrient evaluation.
