Written by: Khadejah Scott, Horticulture, Agriculture, & Natural Resources Extension Agent, UF/IFAS Extension – Wakulla County
A well-manicured lawn not only enhances the beauty of your property but also provides a welcoming outdoor space. In North Florida, where warm weather and abundant rainfall create ideal conditions for lush green lawns, proper mowing practices play a crucial role in maintaining a healthy and vibrant landscape. With the right techniques and considerations tailored to the unique characteristics of this region, you can achieve a pristine lawn that becomes the envy of the neighborhood. In this article, we will explore essential tips and insights for mowing your North Florida lawn, helping you unleash the full potential of your outdoor haven while ensuring its long-term health and sustainability.
Mowing a lawn. Photo Credit: University of Florida/IFAS
Mowing Heights
The turfgrass species’ growth pattern and leaf width influence the ideal mowing height. Grass species that grow horizontally and have narrow leaf blades are often cut lower than grasses that grow upright and have wider leaf blades. Because of its numerous tiny leaf blades, Bermudagrass is an example of a plant that is mowed at low heights. St. Augustinegrass, on the other hand, has wider leaf blades and is cut at a higher height. Rooting depth is also influenced by mowing, with deeper roots developing in response to higher mowing heights. Greater resistance to drought, insects, disease, nematodes, temperature stress, poor soil conditions, nutritional deficiencies, and traffic are benefits of the deeper root system. The main cause of turf damage is frequent mowing below the suggested heights for each species, which should be avoided.
Mowing Frequency
The frequency of lawn mowing is determined by the rate at which the grass grows, which is influenced by various factors such as the type of grass, time of year, weather conditions, and the level of maintenance. In North Florida, the need for mowing during winter months may vary depending on the climate and the type of grass present. Grasses like bahiagrass, which require less maintenance, may primarily be mowed to remove seedheads rather than cutting the leaf blades. To maintain a healthy lawn, it is recommended to mow frequently enough to remove no more than one-third of the blade height at a time. Preserving an ample amount of leaf surface is crucial to allow for photosynthesis, especially when the grass is exposed to environmental or site-related stresses.
A lawn up close. Photo Credit: University of Florida/IFAS
Using Grass Clippings
Leaving grass clippings on the lawn is generally beneficial as it aids in recycling nutrients and organic matter, while reducing waste in landfills. When lawns are regularly mowed, clippings pose minimal issues. Microbes in the soil readily decompose the clippings, returning valuable organic matter and nutrients to the soil without contributing to thatch buildup under normal conditions. However, infrequent mowing can lead to excess clippings, resulting in clumping and potential thatch formation. Excessive thatch can create various problems, including reduced water infiltration, increased risk of pests and diseases, and diminished turf quality. To mitigate environmental concerns, it is crucial to sweep up any grass clippings from hard surfaces like sidewalks or driveways. These clippings contain nutrients that, if washed into storm drains or water bodies, can contribute to water pollution. By sweeping them back onto the lawn, the grass can benefit from the nutrients while minimizing environmental impact.
Proper mowing practices are essential for maintaining a healthy and vibrant lawn in North Florida’s unique climate. Understanding the growth patterns of different grass species, adjusting mowing frequency accordingly, and leaving clippings on the lawn to recycle nutrients are key aspects of lawn maintenance. By following these guidelines, homeowners can achieve a well-manicured lawn that enhances the beauty of their property while promoting environmental sustainability. Additionally, regular mowing helps prevent thatch buildup, ensures optimal photosynthesis, and reduces the risk of pest and disease infestations. By implementing these best practices, residents of North Florida can enjoy a lush, resilient, and visually appealing lawn that serves as a welcoming outdoor space for years to come. Remember, mowing is not just a chore but an art that contributes to the overall health and aesthetics of your landscape. UF/IFAS provides a wealth of information online regarding maintaining a well-manicured lawn. For any questions or concerns, be sure to consult with your local UF/IFAS Extension Office.
Chewing caterpillar damage on St. Augustinegrass Photo by: Steven Arthurs, UF
Tropical sod webworm larvae are destructive pests of warm season turfgrasses in the southeastern U.S. especially in the fall. Commonly referred to as a worm, they are truly caterpillars, the larvae of a moth. Larval feeding damage reduces turfgrass aesthetics, vigor, photosynthesis and density, which is very evident on finer-bladed grasses such as bermudagrass and zoysiagrass. Feeding damage is possible on all grass types however. Adults, a dull brown colored moth about ¾ inch long, rest in sheltered and shrubby areas during the day and are active at dusk. Females deposit clusters of 10-35 eggs on the upper surface of grass blades. The eggs hatch in 3-4 days and develop from a 1 mm long caterpillar to one over 11 mm long through six instars within 21 to 47 days, depending on temperature. Larval feeding occurs at night, leaving the grass looking ragged, shortened and missing.
Sod webworm on soil surface Photo by: Steven Arthurs, UF
Control should be against damaging larvae, not the flying moths. However, insecticidal soap applications to moth harboring areas can reduce re-population frequency. Soil-drenching soap flushes can be used to find the caterpillars, especially in dry and hot grass areas. Bacterial-based insecticides, such as Bt, Bacillus thuringiensis var. kurstaki or Spinosad, will control sod webworm caterpillars without impacting beneficial species as long as they are applied with each flush of grass growth.
Fall armyworms are also active when the weather turns cooler. They feed any time of the day or night, but are most active early in the morning or late in the evening. The 1 ½ inch long gray and white moth lays about 1,000 eggs in multiple masses on any vegetation. Two to 10 days later, the small caterpillar hatches and begins to grow to nearly 2 inches long over a two week period. The fall armyworm is easily recognized by its dark head marked with a distinct pale-colored inverted Y and the long black stripe running along each side of its body. These aggressive feeders “march” rapidly across grassed areas consuming every above-ground plant part. While bacterial-based insecticides will reduce the numbers, control of armyworms usually requires synthetic insecticides.
Armyworm Photo by: Jim Castner, UF
The good news is that grass “worms” can be controlled and the blades will grow back. The damage may be devastating to see, but usually not a permanent problem.
On a daily basis, it is not unusual for our Extension Office to get calls, emails, and walk-ins with questions about insect identification. Sometimes we even get questions about imaginary insects! The overwhelming opinion by our clientele is that the insects in question are harmful to their landscapes and gardens. This is not always the case since there are more than 100,000 species of insects found in the United States, but less than 1% are harmful.
Recently I received a call about an abundance of bugs in a client’s newly installed sod. He was concerned that the insects were taking over his yard. Luckily, he was able to submit some good quality photos so the University of Florida/IFAS Extension Service could help him identify the insects.
An adult ground beetle (Mochtherus tetraspilotus). Photo Credit: Michael C. Thomas, Florida Department of Agriculture & Consumer Services
The photos were sent to a University of Florida Entomologist for identification verification. It turns out the insects were ground beetles (family Carabidae). Adult ground beetles are slender and range between 1/4″ and 3/8″ in length. Their head and thorax are much narrower than their abdomens. Ground beetles are beneficial insects that feed on moth eggs and larvae. They are known predators of soybean loopers, cabbage loopers, and velvetbean caterpillars. It is suspected that the beetles found by the client came from the sod farm and were living in the thatch layer of the sod. They were possibly feeding on sod webworms or other moth larvae.
Accurate identification is the first step of integrated pest management (IPM). In this case, the insect found wasn’t a pest at all. If you need help identifying an insect, feel free to contact your local Extension Agent. For more information on beneficial insects, visit these publications found at edis.ifas.ufl.edu.
The Evidenced-Based Zoysiagrass Management Workshop is returning to Milton on April 23 at the University of Florida – Milton Campus. Attend to get updates on managing zoysiagrass and to earn CEUs. Register at: UF/IFAS Evidence-Based Zoysiagrass Workshop
A new research project at the West Florida Research and Education Center in Jay, FL is looking into the quality of turfgrass cut with a robotic mower. The study is to determine whether the quality of St. Augustinegrass can be improved by continuous mowing with a robotic mower at 2.4″ height instead of the traditional mowing height of 3.5″, removing only a third of leaf blade material per mowing.
Dr. Shaddox talking to participants at the 2018 Gulfcoast Expo & Turfgrass Field Day. Photo Credit: Matt Lollar, University of Florida/IFAS Extension.
The mower being tested is the Miimo manufactured by Honda. This particular model mows and charges on its own and can mow up to 0.37 acres on one charge. It can mow in three programmable cutting patterns: directional; random; or mixed. The study is utilizing the random cutting pattern.
The mower’s three, two-sided blades are mounted on a circular head that can rotate both clockwise and counter-clockwise. The head automatically switches between clockwise and counter-clockwise rotation to reduce wear on the blades. The blades are basically just two-sided razor blades. A buried guide wire is installed on the perimeter of the lawn to serve as a boundary.
A close-up shot of the Miimo mower blades. Photo Credit: Matt Lollar, University of Florida/IFAS Extension.
So far, the plots cared for by the robotic mower look promising! The blades on the robot are much finer than those found on a common rotary mower. Because of this, they cut more cleanly and tend to tear the grass blades less often than the rotary mower. Other robotic mowers on the market include the Worx Landroid, Husqvarna Automower, and Bosch Indego. Please stay tuned for future robotic mower evaluations on other products, energy consumption, and nutrient evaluation.
